The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna

Liton Chandra Paul; Md. Sarwar Hosain; Sohag Sarker; Makhluk Hossain Prio; Monir Morshed; Ajay Krishno Sarkar

doi:doi:10.11648/j.ajnc.20150403.16

| Peer-Reviewed

The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna

Liton Chandra Paul, Md. Sarwar Hosain, Sohag Sarker, Makhluk Hossain Prio, Monir Morshed, Ajay Krishno Sarkar

Published in American Journal of Networks and Communications (Volume 4, Issue 3)

Received: 16 April 2015 Accepted: 28 April 2015 Published: 15 May 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In order to design a microstrip patch antenna at first the designer is to select the substrate material and it’s thickness. So, if the designer has a clear conception about the effect of changing substrate material and it’s thickness on the performance of the antenna, it will be easier to design an antenna. Appropriate selection of dielectric material and it’s thickness is an important task for designing a microstrip patch antenna. This paper represents that how antenna performance changes when we vary substrate material and it’s thickness. The designed inset feed rectangular microstrip patch antenna operates at 2.4GHz (ISM band).

Published in	American Journal of Networks and Communications (Volume 4, Issue 3)
DOI	10.11648/j.ajnc.20150403.16
Page(s)	54-58
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Inset Feed, Dielectric Constant, Substrate Thickness, Bandwidth, Return Loss, Gain, Directivity, Radiation Efficiency

References

[1]	S. S. Holland “Miniaturization of microstrip patch antennas for GPD Applications”, M.Sc. thesis, Dept. of Electrical And Computer Engineering, University of Massachusetts Amherst, May 2008.
[2]	W. Menzel and W. Grabherr ,“A Microstrip Patch Antenna with Coplanar Feed Line”, IEEE microwave and guided wave letters, Vol. 1,No. 11,November 1991.
[3]	Deepak, D. Parashar, R. S. Pathak and S. K. Bhartiya. “Effect of Change in Feed point on the Micro strip Patch Antenna Performance in Novel H shape Antenna”, International Journal of Emerging Trends in Engineering and Development, Vol.5, Issue 3, September 2013.
[4]	C. L. Mak, K. M. Luk , K. F. Lee and Y. L. Chow , ”Experimental Study of a Microstrip Patch Antenna with an L-Shaped Probe” IEEE Transactions on antennas and propagation, vol. 48, no. 5, May 2000
[5]	S. A. Zaidi and M.R. Tripathy “Design and Simulation Based Study of Microstrip E–Shaped Patch Antenna Using Different Substrate materials ”,Advance in Electronic and Electric Engineering., Volume 4, Number 6, pp 611, 2014
[6]	K. P. Kumar, K. S.Rao, T. Sumanth, N. M. Rao, R. A. Kumar and Y. Harish, “Effect of feeding techniques on the radiation characteristics of patch antenna design and analysis”, International Journal of Advanced Research in Computer and Communication Engineering, Vol. 2, Issue 2, February 2013.
[7]	A. I. Salem, A. A. Salama, A. M. Eid, M. Sobhy, and A. watany, “Performance Enhancement of Fabricated and Simulated Inset Fed Microstrip Rectangular Patch Antennas”, International Journal of Scientific & Engineering Research, Volume 5, Issue 4, April 2014.
[8]	T. k. Raina “Design, fabrication and performance Evaluation of micro-strip patch Antennas for wireless applications”, M. Sc thesis, Department of Electronics and Communication Engineering, Thapar University, Patiala, June 2012.
[9]	Using aperture coupled feedh. Singh, Y. K. Awasthi and A. K. Verma “Microstrip Patch Antenna with the Defected Ground Structure and Defected Microstrip Structure” proceedings of International Confrence on Microwave, 2008.
[10]	Keith R. Carver, and James W. Mink, “Microstrip antenna technology”, IEEE transactions on antennas and propagation”, Vol AP-29, no.1, pp 21, January 1981.
[11]	J. W. Salman, M.M. Ameen and S. O. Hassan “Effects of the Loss Tangent, Dielectric Substrate Permittivity and Thickness on the Performance of Circular Microstrip Antennas” Journal of Engineering and Development, Vol. 10, No.1, March 2006.
[12]	K.P. Kumar, K.S. Rao, V. M. Rao, K. Uma, A. Somasekhar and C. M. Mohan “The effect of dielectric permittivity on radiation characteristics of co-axially feed rectangular patch antenna: Design & Analysis”, International Journal of Advanced Research in Computer and Communication Engineering, Vol. 2, Issue 2, February 2013.
[13]	V. Natarajan and C. Chatterjee, “Effect of substrate permivity and thickness on performance on single layer, wideband, U-slot antennas on microwave substrates”, 20th annual review of progress in applied computational Electromagnetics, April 2004.

Cite This Article

Plain Text BibTeX RIS

APA Style

Liton Chandra Paul, Md. Sarwar Hosain, Sohag Sarker, Makhluk Hossain Prio, Monir Morshed, et al. (2015). The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna. American Journal of Networks and Communications, 4(3), 54-58. https://doi.org/10.11648/j.ajnc.20150403.16

Copy | Download

ACS Style

Liton Chandra Paul; Md. Sarwar Hosain; Sohag Sarker; Makhluk Hossain Prio; Monir Morshed, et al. The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna. Am. J. Netw. Commun. 2015, 4(3), 54-58. doi: 10.11648/j.ajnc.20150403.16

Copy | Download

AMA Style

Liton Chandra Paul, Md. Sarwar Hosain, Sohag Sarker, Makhluk Hossain Prio, Monir Morshed, et al. The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna. Am J Netw Commun. 2015;4(3):54-58. doi: 10.11648/j.ajnc.20150403.16

Copy | Download

@article{10.11648/j.ajnc.20150403.16,
  author = {Liton Chandra Paul and Md. Sarwar Hosain and Sohag Sarker and Makhluk Hossain Prio and Monir Morshed and Ajay Krishno Sarkar},
  title = {The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna},
  journal = {American Journal of Networks and Communications},
  volume = {4},
  number = {3},
  pages = {54-58},
  doi = {10.11648/j.ajnc.20150403.16},
  url = {https://doi.org/10.11648/j.ajnc.20150403.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajnc.20150403.16},
  abstract = {In order to design a microstrip patch antenna at first the designer is to select the substrate material and it’s thickness. So, if the designer has a clear conception about the effect of changing substrate material and it’s thickness on the performance of the antenna, it will be easier to design an antenna. Appropriate selection of dielectric material and it’s thickness is an important task for designing a microstrip patch antenna. This paper represents that how antenna performance changes when we vary substrate material and it’s thickness. The designed inset feed rectangular microstrip patch antenna operates at 2.4GHz (ISM band).},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna
AU  - Liton Chandra Paul
AU  - Md. Sarwar Hosain
AU  - Sohag Sarker
AU  - Makhluk Hossain Prio
AU  - Monir Morshed
AU  - Ajay Krishno Sarkar
Y1  - 2015/05/15
PY  - 2015
N1  - https://doi.org/10.11648/j.ajnc.20150403.16
DO  - 10.11648/j.ajnc.20150403.16
T2  - American Journal of Networks and Communications
JF  - American Journal of Networks and Communications
JO  - American Journal of Networks and Communications
SP  - 54
EP  - 58
PB  - Science Publishing Group
SN  - 2326-8964
UR  - https://doi.org/10.11648/j.ajnc.20150403.16
AB  - In order to design a microstrip patch antenna at first the designer is to select the substrate material and it’s thickness. So, if the designer has a clear conception about the effect of changing substrate material and it’s thickness on the performance of the antenna, it will be easier to design an antenna. Appropriate selection of dielectric material and it’s thickness is an important task for designing a microstrip patch antenna. This paper represents that how antenna performance changes when we vary substrate material and it’s thickness. The designed inset feed rectangular microstrip patch antenna operates at 2.4GHz (ISM band).
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Liton Chandra Paul

Department of Electronic and Telecommunication Engineering, Pabna University of Science & Technology, Pabna, Bangladesh
Md. Sarwar Hosain

Department of Information and Communication Engineering, Pabna University of Science & Technology, Pabna, Bangladesh
Sohag Sarker

Department of Information and Communication Engineering, Pabna University of Science & Technology, Pabna, Bangladesh
Makhluk Hossain Prio

Department of Electrical and Electronic Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh
Monir Morshed

Department of Information and Communication Technology, Mawlana Bhashani Science and Technology University, Tangail, Bangladesh
Ajay Krishno Sarkar

Department of Electrical and Electronic Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Liton Chandra Paul, Md. Sarwar Hosain, Sohag Sarker, Makhluk Hossain Prio, Monir Morshed, et al. (2015). The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna. American Journal of Networks and Communications, 4(3), 54-58. https://doi.org/10.11648/j.ajnc.20150403.16

Copy | Download

ACS Style

Liton Chandra Paul; Md. Sarwar Hosain; Sohag Sarker; Makhluk Hossain Prio; Monir Morshed, et al. The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna. Am. J. Netw. Commun. 2015, 4(3), 54-58. doi: 10.11648/j.ajnc.20150403.16

Copy | Download

AMA Style

Liton Chandra Paul, Md. Sarwar Hosain, Sohag Sarker, Makhluk Hossain Prio, Monir Morshed, et al. The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna. Am J Netw Commun. 2015;4(3):54-58. doi: 10.11648/j.ajnc.20150403.16

Copy | Download

@article{10.11648/j.ajnc.20150403.16,
  author = {Liton Chandra Paul and Md. Sarwar Hosain and Sohag Sarker and Makhluk Hossain Prio and Monir Morshed and Ajay Krishno Sarkar},
  title = {The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna},
  journal = {American Journal of Networks and Communications},
  volume = {4},
  number = {3},
  pages = {54-58},
  doi = {10.11648/j.ajnc.20150403.16},
  url = {https://doi.org/10.11648/j.ajnc.20150403.16},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajnc.20150403.16},
  abstract = {In order to design a microstrip patch antenna at first the designer is to select the substrate material and it’s thickness. So, if the designer has a clear conception about the effect of changing substrate material and it’s thickness on the performance of the antenna, it will be easier to design an antenna. Appropriate selection of dielectric material and it’s thickness is an important task for designing a microstrip patch antenna. This paper represents that how antenna performance changes when we vary substrate material and it’s thickness. The designed inset feed rectangular microstrip patch antenna operates at 2.4GHz (ISM band).},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - The Effect of Changing Substrate Material and Thickness on the Performance of Inset Feed Microstrip Patch Antenna
AU  - Liton Chandra Paul
AU  - Md. Sarwar Hosain
AU  - Sohag Sarker
AU  - Makhluk Hossain Prio
AU  - Monir Morshed
AU  - Ajay Krishno Sarkar
Y1  - 2015/05/15
PY  - 2015
N1  - https://doi.org/10.11648/j.ajnc.20150403.16
DO  - 10.11648/j.ajnc.20150403.16
T2  - American Journal of Networks and Communications
JF  - American Journal of Networks and Communications
JO  - American Journal of Networks and Communications
SP  - 54
EP  - 58
PB  - Science Publishing Group
SN  - 2326-8964
UR  - https://doi.org/10.11648/j.ajnc.20150403.16
AB  - In order to design a microstrip patch antenna at first the designer is to select the substrate material and it’s thickness. So, if the designer has a clear conception about the effect of changing substrate material and it’s thickness on the performance of the antenna, it will be easier to design an antenna. Appropriate selection of dielectric material and it’s thickness is an important task for designing a microstrip patch antenna. This paper represents that how antenna performance changes when we vary substrate material and it’s thickness. The designed inset feed rectangular microstrip patch antenna operates at 2.4GHz (ISM band).
VL  - 4
IS  - 3
ER  -

Copy | Download