Volume 1, Issue 4, November 2016, Page: 30-41
Model Optimal Control of the Four Tank System
Wael A. Altabey, Southeast University, International Institute for Urban Systems Engineering, Nanjing, China; Department of Mechanical Engineering, Faculty of Engineering, Alexandria University, Alexandria, Egypt
Received: Sep. 10, 2016;       Accepted: Sep. 26, 2016;       Published: Oct. 15, 2016
DOI: 10.11648/j.ijssam.20160104.11      View  4279      Downloads  284
Abstract
The four tank system is a widely used mechatronic laboratory system in control theory. This work is aimed to choose the best controller for the four tank system (4TS) with two input force. The optimal control is one of the best techniques in a sense of performance, and is demonstrated for the level control of 4TS. There are several controller systems in optimal control for this purpose which are Linear Quadratic Regulator (LQR), Linear Quadratic Gaussian Regulator (LQGR), H2, and H controller system. These controllers will be applied to this important mechatronic system (4TS) separately, and compared the performance for disturbance rejection with each other to study the effect of these controller systems on the 4TS controlled state. On the other hand the performances of the optimal control systems are compared with other controller performances available in literatures for the same case study. The results indicate that the Linear Quadratic Regulator (LQR) provides significant improvement over completely controllers. The simulations were carried out in MATLAB-Simulink.
Keywords
Mechatronic System; Optimal Control; LQR; LQGR; H2 Method; H Method
To cite this article
Wael A. Altabey, Model Optimal Control of the Four Tank System, International Journal of Systems Science and Applied Mathematics. Vol. 1, No. 4, 2016, pp. 30-41. doi: 10.11648/j.ijssam.20160104.11
Copyright
Copyright © 2016 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Chianeh, H. A. , Stigter, J. D. and Keesmana, K. J. (2011), “ Optimal input design for parameter estimation in a single and double tank system through direct control of parametric output sensitivities”, J. of Process Control, Vol. 21, No. 1, pp. 111–118.
[2]
Skogestad, S. and Postlethwaite, I. (2001), “Multivariable Feedback Control”, Prentice Hall, New Jersey.
[3]
Kovács, L., Borbély, E. and Benyó, Z. (2010), “Optimal Control of the Three Tank System in H2/H∞ space”, Proceedings of the 8th IEEE International Symposium on Applied Machine Intelligence and Informatics, Slovakia, 28-30 January.
[4]
Iplikci, S. (2010), “A support vector machine based control application to the experimental three-tank system”, J. ISA Transactions, Vol. 49. No. 3, pp. 376–386.
[5]
Altinisik, U. and Yildirim, M. (2012), “ A new fault tolerant control approach for the three-tank system using data mining”, J. Computers & Electrical Engineering, Vol. 38, No. 6, pp. 1627–1635.
[6]
Sarailoo, M., Rahmani, Z. and Rezaie, Z. (2015), “A novel model predictive control scheme based on bees algorithm in a class of nonlinear systems: Application to a three tank system”, J. Neurocomputing, Vol. 152, No. 25, pp. 294–304.
[7]
Gatzke, E. P., Meadows, E. S., Wang, C. and Doyle III, F. J. (2000), “Model Based Control of a Four-Tank System”, J. Computers and Chemical Engineering, Vol. 24, No. 2-7, pp. 1503-1509.
[8]
Mercangoz, M., Francis, J. and Doyle III, F. J (2007), “Distributed model predictive control of an experimental four-tank system”, J. Process Control, Vol. 17, pp. 297-308.
[9]
Drca, I. (2007), “Nonlinear Model Predictive Control of the Four Tank Process”, M.Sc. Dissertation, University of Seville, Stockholm, Sweden.
[10]
Alvarado, I., Limon, D., la Peña, D. M., Maestre, J. M., Ridao, M. A., Scheu, H., Marquardt, W., Negenborn, R. R., De Schutter, B., Valencia, F. and Espinosa, J. (2011), “A comparative analysis of distributed MPC techniques applied to the HD-MPC four-tank benchmark”, J. of Process Control, Vol. 21, No. 5, pp.800–815.
[11]
Ruscio, D. D. (2012), “ Discrete LQ optimal control with integral action: A simple controller on incremental form for MIMO systems”, J. Modeling, Identification and Control, Vol. 33, No. 2, pp. 35-44.
[12]
Balsemin, A. and Picci, G. (2013), “Applications Oriented Optimal Input Design: An Analysis of a quadruple water tank process”, M.Sc. Dissertation, University of Padova, Italy.
[13]
Khalid, U., Shah, Y. A., Qamar, S., Gohar, W., Raza, R. and Shah, W. A. (2014), “Flow and level control of coupled four tanks system using artificial neural network”, American Journal of Computation, Communication and Control, Vol. 1, No. 2, pp. 30-35.
[14]
Gouta, H., Said, S. H. and M’sahli, F. (2015), “Model-based Predictive and Backstepping controllers for a state coupled four-tank system with bounded control inputs: A comparative study”, J. the Franklin Institute, Vol. 352, No. 11, pp. 4864-4889.
[15]
Dai, L. and Åstrӧm, K. (1999), “Dynamic matrix control of a quadruple tank process”, Proceedings of The World Congress 14th IFAC, Beijing, China, July, pp. 295–300.
[16]
Vadigepalli, R., Gatzke, E. P. and Doyle III, F. J. (2001), “Robust control of a multivariable experimental four-tank system”, Ind. Eng. Chem. Res. Vol. 40, No. 8, pp. 1916–1927.
[17]
Abbas, H., Qamar, S. (2012), “Sliding Mode Control For Coupled-Tank Liquid Level Control System”, Proceedings of the 10th International Conference on Frontiers of Information Technology (FIT), Pakistan, 17-19 December, pp. 325-330.
[18]
Wu, Dongrui, and Woei, W. T. (2004), “A type-2 fuzzy logic controller for the liquid-level process”, Proceedings of IEEE International Conference on Fuzzy System, Vol. 2, pp. 953-958.
[19]
Johansson, K. H. and Nunes, J. L. R. (1998), A multivariable laboratory process with an adjustable zero”, Proceeding of American Control Conference, Pennsylvania, USA, June 24-26, pp. 2045–2049.
[20]
Miaomiao ma, Chenz, H., Findeisen, R. and Ower, F. A. (2012), “Non-linear receding horizon control of quadruple tank system and real time implementation”, International Journal of Innovative Computing, Information and Control, Vol. 8, pp. 7083-7093.
[21]
Xue, D., Chen, Y. and Atherton, D. (2007), “Linear Feedback Control (Analysis and Design with MATLAB), Society for Industrial and Applied Mathematics, Philadelphia.
Browse journals by subject